What does a benchmark represent in construction surveying?
Correct Answer
B) A permanent elevation reference point
A benchmark is a permanent point with a known elevation that serves as a reference for establishing elevations throughout the construction site. All other elevation measurements are referenced to this fixed point.
Why This Is the Correct Answer
A benchmark is indeed a permanent elevation reference point with a known, surveyed elevation that serves as the foundation for all vertical measurements on a construction project. It provides a fixed datum from which all other elevations are measured and calculated. Benchmarks are typically established by professional surveyors and marked with permanent monuments or markers that won't be disturbed during construction. This permanent reference ensures consistency and accuracy in elevation control throughout the entire project lifecycle.
Why the Other Options Are Wrong
Option A: A horizontal reference point for layout
While benchmarks can be used for layout purposes, they specifically represent vertical elevation references, not horizontal reference points. Horizontal layout typically uses other survey control points.
Option C: A property corner marker
Property corner markers define property boundaries and ownership limits, not elevation references. These are separate surveying elements that establish horizontal property lines rather than vertical elevations.
Option D: A temporary construction stake
Benchmarks are permanent, not temporary. Construction stakes are temporary markers used during construction phases, while benchmarks must remain stable and undisturbed throughout the project and beyond.
Memory Technique
Think 'BENCH-mark' = the permanent BENCH (foundation) that MARKS all elevations - it's the starting point that never moves, just like a sturdy bench you can always rely on.
Reference Hint
Look up surveying fundamentals or site layout sections in your construction reference manual, typically found in chapters covering site preparation or surveying basics.
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass