A Safety Data Sheet (SDS) must be readily accessible to employees within how many minutes of a request?
Correct Answer
C) Immediately
Under OSHA's Hazard Communication Standard, Safety Data Sheets must be readily accessible to employees during their work shift. This means immediate access when requested, not delayed access.
Why This Is the Correct Answer
OSHA's Hazard Communication Standard (29 CFR 1910.1200) requires that Safety Data Sheets be readily accessible to employees during their work shift. The term 'readily accessible' means immediate availability without delay when an employee requests the information. This immediate access requirement ensures worker safety in emergency situations where quick access to chemical hazard information could be critical. Any time delay could potentially compromise worker safety when dealing with hazardous materials.
Why the Other Options Are Wrong
Option A: 15 minutes
15 minutes is too long of a delay. OSHA requires immediate access, not a 15-minute window that could endanger worker safety in emergency situations.
Option B: 30 minutes
30 minutes represents an unacceptable delay under OSHA standards. Workers need immediate access to chemical safety information, especially in emergency situations.
Option D: 60 minutes
60 minutes is far too long and would violate OSHA's requirement for readily accessible information. Such a delay could result in serious safety consequences.
Memory Technique
Think 'SDS = Safety Doesn't Stop' - when safety is at risk, there's no time to wait for information.
Reference Hint
OSHA Construction Standards 29 CFR 1926.95 or Hazard Communication Standard 29 CFR 1910.1200
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass