According to ADA guidelines, what is the maximum height for wall-mounted objects that project more than 4 inches into a circulation path?
Correct Answer
C) 80 inches
ADA guidelines require that objects projecting more than 4 inches into circulation paths be mounted no lower than 80 inches above the floor. This prevents hazards for people with visual impairments who use canes for navigation.
Why This Is the Correct Answer
The ADA requires wall-mounted objects that project more than 4 inches into circulation paths to be mounted at a minimum height of 80 inches above the floor. This height ensures that people with visual impairments using canes can detect the object's support post or base before encountering the protruding element. The 80-inch minimum height creates a safe 'head clearance zone' that prevents injuries from walking into protruding objects.
Why the Other Options Are Wrong
Option A: 68 inches
68 inches is too low and would create a serious hazard for people with visual impairments, as protruding objects at this height could cause head injuries and would not be detectable by standard cane techniques.
Option B: 78 inches
78 inches is below the required 80-inch minimum height and would still pose a safety risk for individuals with visual impairments navigating circulation paths.
Option D: 84 inches
84 inches exceeds the minimum requirement, and while not technically wrong for safety, it's not the specific minimum height required by ADA guidelines that the question is asking for.
Memory Technique
Remember 'EIGHTY for SAFETY' - objects sticking out more than 4 inches must be at least 80 inches high to keep heads safe.
Reference Hint
2010 ADA Standards for Accessible Design, Section 307 - Protruding Objects, or Florida Building Code Chapter 11 - Accessibility
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Previous Question
A rectangular excavation is 12 feet deep, 20 feet long, and 8 feet wide in Type B soil. What is the minimum horizontal distance required for a simple slope from the top of the excavation to the bottom?
Next Question
When operating a tower crane on a construction site, what is the most critical safety consideration during high wind conditions?