An accessible parking space detail shows dimensions of 8 feet wide with a 5-foot access aisle. Is this compliant with ADA requirements for a standard accessible space?
Correct Answer
A) Yes, this meets ADA requirements
Standard accessible parking spaces require 8 feet minimum width with a 5-foot access aisle, so this detail meets ADA requirements.
Why This Is the Correct Answer
The dimensions shown (8 feet wide parking space with 5-foot access aisle) exactly match the ADA Standards for Accessible Design requirements for standard accessible parking spaces. The ADA requires a minimum width of 8 feet for the parking space itself and a minimum of 5 feet for the adjacent access aisle. These dimensions ensure adequate space for wheelchair users to exit vehicles and maneuver safely. Since both measurements meet the minimum requirements, this detail is fully compliant with ADA standards.
Why the Other Options Are Wrong
Option B: No, the space is too narrow
The parking space width of 8 feet meets the exact minimum requirement under ADA standards, so it is not too narrow. The ADA specifically states that accessible parking spaces must be at least 8 feet wide, making this dimension compliant.
Option C: No, the access aisle is too narrow
The 5-foot access aisle meets the minimum ADA requirement for standard accessible spaces, so it is not too narrow. Only van-accessible spaces require an 8-foot access aisle, while standard accessible spaces need only 5 feet.
Option D: No, both the space and aisle are too narrow
Both dimensions are correct according to ADA standards - the 8-foot space width and 5-foot access aisle both meet the minimum requirements, so neither is too narrow for a standard accessible parking space.
Memory Technique
Use the phrase 'Standard Spaces: Eight and Five to Stay Alive' - meaning 8-foot space width and 5-foot aisle keep you ADA compliant for standard accessible parking.
Reference Hint
2010 ADA Standards for Accessible Design, Section 502 - Parking Spaces, or Florida Building Code Chapter 11 - Accessibility
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass