A confined space entry requires continuous atmospheric monitoring. What is the minimum acceptable oxygen level for safe entry?
Correct Answer
B) 19.5%
OSHA requires that oxygen levels be maintained between 19.5% and 23.5% for safe confined space entry. Below 19.5% creates an oxygen-deficient atmosphere that can be immediately dangerous to life and health.
Why This Is the Correct Answer
OSHA Standard 29 CFR 1910.146 specifically mandates that oxygen levels must be maintained between 19.5% and 23.5% for safe confined space entry. The 19.5% minimum threshold is critical because oxygen levels below this create an oxygen-deficient atmosphere that poses immediate danger to workers. This standard ensures workers have adequate oxygen for normal respiration and prevents hypoxia-related incidents. Continuous atmospheric monitoring is required to verify these levels are maintained throughout the work period.
Why the Other Options Are Wrong
Option A: 16%
16% oxygen is dangerously low and creates an oxygen-deficient atmosphere that can cause immediate health hazards including loss of consciousness, impaired judgment, and potentially fatal hypoxia.
Option C: 21%
While 21% represents normal atmospheric oxygen levels, OSHA sets the minimum threshold at 19.5% to account for potential fluctuations and provide a safety margin during confined space work.
Option D: 23.5%
23.5% represents the upper limit of OSHA's acceptable range, not the minimum requirement, and exceeding this level can create oxygen-enriched conditions that increase fire and explosion risks.
Memory Technique
Remember '19.5 to stay alive' - this helps recall that 19.5% is the minimum oxygen level needed to prevent life-threatening oxygen deficiency in confined spaces.
Reference Hint
OSHA 29 CFR 1910.146 - Permit-Required Confined Spaces, or safety chapter covering atmospheric hazards and monitoring requirements
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass