A crane with a 150-foot boom is lifting a 5,000-pound load at a 75-foot radius. If the load chart shows a capacity of 8,000 pounds at this configuration, what is the safety factor being maintained?
Correct Answer
B) 1.6
Safety factor = Rated capacity ÷ Actual load = 8,000 lbs ÷ 5,000 lbs = 1.6. This provides a 60% safety margin above the actual load being lifted.
Why This Is the Correct Answer
The safety factor is calculated by dividing the crane's rated capacity by the actual load being lifted. In this case, the load chart shows the crane can handle 8,000 pounds at the 75-foot radius configuration, but only 5,000 pounds is being lifted. The calculation is 8,000 ÷ 5,000 = 1.6, meaning the crane is operating at 1.6 times the safety margin.
Why the Other Options Are Wrong
Option A: 1.2
This would result from incorrectly calculating 6,000 ÷ 5,000 = 1.2, possibly confusing the rated capacity or using wrong numbers from the problem.
Option C: 2.0
This would result from incorrectly calculating 10,000 ÷ 5,000 = 2.0, possibly misreading the rated capacity as 10,000 pounds instead of 8,000 pounds.
Option D: 2.4
This would result from incorrectly calculating 12,000 ÷ 5,000 = 2.4, possibly misreading the rated capacity as 12,000 pounds or confusing it with another value.
Memory Technique
Remember 'CAN over ARE' - what the crane CAN lift over what you ARE lifting gives you the safety factor.
Reference Hint
OSHA 1926 Subpart CC - Cranes and Derricks in Construction, specifically load chart requirements and capacity calculations
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass