According to OSHA standards, at what height must fall protection be provided for workers on scaffolds?
Correct Answer
B) 10 feet
OSHA requires fall protection on scaffolds when workers are 10 feet or more above a lower level. This is different from the general 6-foot rule for other construction activities.
Why This Is the Correct Answer
OSHA 29 CFR 1926.451(g)(1) specifically requires fall protection systems for employees working on scaffolds when they are 10 feet or more above a lower level. This is a distinct requirement that differs from the general construction fall protection standard of 6 feet found in other OSHA regulations. The 10-foot threshold for scaffolds recognizes the unique nature of scaffold work and provides specific safety parameters for this type of elevated work platform.
Why the Other Options Are Wrong
Option A: 6 feet
6 feet is the general OSHA fall protection requirement for most construction activities under 29 CFR 1926.501, but scaffolds have their own specific standard of 10 feet under the scaffolding regulations.
Option C: 8 feet
8 feet is not an OSHA fall protection threshold for any standard construction activity or scaffolding work - this is not a recognized height requirement in OSHA regulations.
Option D: 4 feet
4 feet is too low and not an OSHA fall protection threshold for construction work - this would be impractical for scaffold operations and is not found in any OSHA standard.
Memory Technique
Think 'Scaffold = Special = 10' or remember 'Six for general, Ten for scaffold' - scaffolds get special treatment with a higher threshold.
Reference Hint
OSHA 29 CFR 1926.451 - Scaffolding standards, specifically subsection (g)(1) for fall protection requirements
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Previous Question
What is the minimum compressive strength typically required for concrete used in residential foundation construction?
Next Question
A scaffold platform is 12 feet long and 5 feet wide. If the maximum load capacity is 25 pounds per square foot, what is the total weight capacity of this platform?