Your project requires removal of 180 square feet of asbestos-containing ceiling tiles. What type of asbestos project classification does this represent?
Correct Answer
A) Class II asbestos work
Class II asbestos work involves removal of asbestos-containing materials that are not thermal system insulation or surfacing materials, such as floor tiles, ceiling tiles, and roofing materials.
Why This Is the Correct Answer
Class II asbestos work specifically covers the removal of asbestos-containing materials that are not thermal system insulation or surfacing materials. Ceiling tiles fall directly into this category as they are building materials containing asbestos but are not part of thermal systems or surface coatings. The 180 square feet of ceiling tiles represents a typical Class II project involving the removal of asbestos-containing building materials. This classification requires specific safety protocols and worker protection measures appropriate for this type of asbestos removal work.
Why the Other Options Are Wrong
Option B: Class IV asbestos work
Class IV asbestos work involves custodial activities where employees clean up asbestos-containing waste and debris, such as cleaning up after other asbestos work classes, not the actual removal of ceiling tiles.
Option D: Class III asbestos work
Class I asbestos work involves removal of thermal system insulation and surfacing asbestos-containing materials, such as pipe insulation, boiler insulation, and sprayed-on fireproofing materials, not ceiling tiles.
Memory Technique
Use 'Class II = Building Materials' - ceiling tiles, floor tiles, roofing. Class I = Insulation (thermal systems). Remember 'II' looks like two tiles stacked on top of each other.
Reference Hint
Florida Building Code, Chapter 15 - Environmental Regulations, or OSHA 29 CFR 1926.1101 for asbestos work classifications
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
Your crew discovers suspected asbestos-containing materials during a renovation project. What is the first action you should take?
A scaffold platform is 12 feet long and 5 feet wide. If the maximum load capacity is 25 pounds per square foot, what is the total weight capacity of this platform?
Which CSI MasterFormat Division would contain specifications for fire-stopping and firesafing materials?
In tilt-up concrete construction, what is the primary advantage of this method over conventional cast-in-place construction?
Which OSHA standard specifically addresses construction industry safety and health regulations?
A structural drawing shows a beam labeled 'W12x26'. What does the '26' represent?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass