Which section of 29 CFR 1926 specifically covers electrical safety requirements for construction?
Correct Answer
D) Subpart K
Subpart K of 29 CFR 1926 specifically addresses electrical safety requirements for construction work, including installation safety requirements and safety-related work practices.
Why This Is the Correct Answer
Subpart K of 29 CFR 1926 is specifically dedicated to electrical safety requirements for construction work. This subpart covers both installation safety requirements and safety-related work practices that construction workers must follow. It includes provisions for electrical installations, use of electrical equipment, and protection against electrical hazards on construction sites. This is a fundamental OSHA regulation that all general contractors must understand for worker safety compliance.
Why the Other Options Are Wrong
Option B: Subpart M
Subpart N of 29 CFR 1926 covers helicopters, hoists, elevators, and conveyors, not electrical safety. This subpart deals with the safe operation of material handling equipment and aerial transportation on construction sites.
Option C: Subpart N
Subpart M of 29 CFR 1926 covers fall protection requirements, not electrical safety. This subpart addresses protection from falls in construction work, including requirements for guardrails, safety nets, and personal fall arrest systems.
Memory Technique
Use the mnemonic 'K = Kilowatts = Electrical' or remember the alphabetical sequence: K-L-M-N where K=Electrical, L=Ladders/Scaffolds, M=Material handling/Fall protection, N=hoists/elevators
Reference Hint
29 CFR 1926 Subpart K - Electrical, sections 1926.95 and 1926.400-449 in OSHA Construction Standards
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
Your crew discovers suspected asbestos-containing materials during a renovation project. What is the first action you should take?
A scaffold platform is 12 feet long and 5 feet wide. If the maximum load capacity is 25 pounds per square foot, what is the total weight capacity of this platform?
Which CSI MasterFormat Division would contain specifications for fire-stopping and firesafing materials?
In tilt-up concrete construction, what is the primary advantage of this method over conventional cast-in-place construction?
Which OSHA standard specifically addresses construction industry safety and health regulations?
A structural drawing shows a beam labeled 'W12x26'. What does the '26' represent?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass