On an electrical plan, a circle with three curved lines extending from it represents what type of fixture?
Correct Answer
D) Ceiling fan
A ceiling fan is represented by a circle with three curved lines extending from it, representing the fan blades. This is a standard electrical symbol used across architectural drawings.
Why This Is the Correct Answer
The electrical symbol for a ceiling fan consists of a circle with three curved lines extending from it, which visually represents the fan motor (circle) and the three fan blades (curved lines). This is a standardized symbol used consistently across architectural and electrical drawings in the construction industry. The curved lines specifically indicate the rotating motion of the fan blades, making this symbol distinct from other electrical fixtures.
Why the Other Options Are Wrong
Option A: Smoke detector
An exhaust fan is usually represented by a square or rectangle with an 'X' or diagonal lines through it, often with 'EF' notation. While it is a fan, the symbol is different because exhaust fans are typically square-shaped fixtures mounted in walls or ceilings without visible blades.
Option B: Recessed light
A recessed light is typically represented by a circle with crosshairs or parallel lines through it, sometimes with additional notation like 'R' for recessed. The three curved lines are not part of the recessed light symbol since recessed lights don't have moving parts or blades.
Memory Technique
Think 'Circle with Curves = Ceiling fan' - the three curved lines look exactly like the three blades you'd see on an actual ceiling fan when viewed from below.
Reference Hint
Look up electrical symbols and legends in architectural drawing standards or the electrical section of construction reference materials, typically found in blueprint reading chapters.
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
Your crew discovers suspected asbestos-containing materials during a renovation project. What is the first action you should take?
A scaffold platform is 12 feet long and 5 feet wide. If the maximum load capacity is 25 pounds per square foot, what is the total weight capacity of this platform?
Which CSI MasterFormat Division would contain specifications for fire-stopping and firesafing materials?
In tilt-up concrete construction, what is the primary advantage of this method over conventional cast-in-place construction?
Which OSHA standard specifically addresses construction industry safety and health regulations?
A structural drawing shows a beam labeled 'W12x26'. What does the '26' represent?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass