According to the California Residential Code, what is the minimum horizontal distance required between a private well and a septic tank?
Correct Answer
B) 100 feet
CRC Section P2602.2 and Table P2602.1 require a minimum separation of 100 feet between a private well and septic tank. This distance prevents contamination of the potable water supply from wastewater systems, which is critical for public health and safety in areas not served by municipal utilities.
Why This Is the Correct Answer
CRC Section P2602.2 and Table P2602.1 require a minimum separation of 100 feet between a private well and septic tank. This distance prevents contamination of the potable water supply from wastewater systems, which is critical for public health and safety in areas not served by municipal utilities.
More trade-general-building Questions
When installing engineered lumber joists (I-joists) in California residential construction, what is the primary code requirement for web stiffeners?
What is the required attic ventilation ratio when a vapor retarder is installed on the warm-in-winter side of the ceiling according to the California Residential Code?
In California's Wildland-Urban Interface (WUI) areas, which underlayment requirement applies to Class A fire-rated roof assemblies?
In California, when installing a tankless water heater in a seismic zone, what additional requirement must be met beyond standard installation practices?
According to the California Building Code (CBC), what is the minimum lap splice length for #4 rebar in a concrete foundation wall in normal weight concrete with f'c = 3000 psi?
According to CBC requirements for retaining walls in California, what additional design consideration must be addressed for retaining walls over 4 feet in height located in seismic design categories D, E, and F?
When constructing retaining walls in California that exceed 4 feet in height, which CBC requirement must be met regarding drainage?
Under California regulations, when is a reduced pressure principle (RPP) backflow prevention assembly required for a residential water service connection?
Under California Title 24, what is the minimum electrical service size required for new single-family residential construction?
According to the California Building Code, buildings located in Seismic Design Category D must comply with which specific seismic design requirements?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass
Related Study Resources
Previous Question
When installing a gas water heater in California, what is the minimum clearance required from the draft hood to combustible construction above the unit?
Next Question
When installing a gas water heater in a California residence, what is the minimum clearance required from the draft hood to combustible materials?