According to Florida Building Code accessibility requirements, what is the minimum maneuvering clearance required on the pull side of a door?
Correct Answer
B) 18 inches
The Florida Building Code requires a minimum of 18 inches of maneuvering clearance on the pull side of a door to allow wheelchair users adequate space to approach and open the door safely.
Why This Is the Correct Answer
The Florida Building Code requires 18 inches of maneuvering clearance on the pull side of a door to ensure accessibility compliance. This measurement provides adequate space for wheelchair users to position themselves properly when opening a door that swings toward them. The 18-inch clearance allows for the wheelchair footrests and the user's reach while maintaining safe operation. This requirement is based on ADA standards that have been incorporated into the Florida Building Code.
Why the Other Options Are Wrong
Option A: 24 inches
24 inches exceeds the minimum requirement and while it would be acceptable, it is not the minimum standard specified in the code
Option D: 12 inches
12 inches is insufficient clearance and does not meet accessibility requirements, as it would not provide adequate space for wheelchair maneuvering
Memory Technique
Think '18 to pull' - you need 18 inches on the pull side because pulling requires more maneuvering space than pushing
Reference Hint
Florida Building Code Chapter 11 - Accessibility, Section 1133B.2.4.1 for door maneuvering clearances
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
Your crew discovers suspected asbestos-containing materials during a renovation project. What is the first action you should take?
A scaffold platform is 12 feet long and 5 feet wide. If the maximum load capacity is 25 pounds per square foot, what is the total weight capacity of this platform?
Which CSI MasterFormat Division would contain specifications for fire-stopping and firesafing materials?
In tilt-up concrete construction, what is the primary advantage of this method over conventional cast-in-place construction?
Which OSHA standard specifically addresses construction industry safety and health regulations?
A structural drawing shows a beam labeled 'W12x26'. What does the '26' represent?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass