According to 29 CFR 1926.95, when is eye and face protection required on construction sites?
Correct Answer
B) When employees are exposed to eye or face hazards
OSHA 29 CFR 1926.95 requires eye and face protection whenever employees are exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids, caustic liquids, chemical gases, or potentially injurious light radiation.
Why This Is the Correct Answer
29 CFR 1926.95 establishes a performance-based standard requiring eye and face protection whenever employees are exposed to eye or face hazards. This includes flying particles, molten metal, liquid chemicals, acids, caustic liquids, chemical gases, or potentially injurious light radiation. The regulation is comprehensive and applies to any situation where these hazards exist, not limited to specific areas or operations.
Why the Other Options Are Wrong
Option A: Only in designated hazardous areas
This is incorrect because the regulation doesn't limit protection to designated hazardous areas only. Eye and face protection is required wherever hazards exist on the construction site, regardless of whether the area is specifically designated as hazardous.
Option C: Only during welding operations
This is too restrictive. While welding operations certainly require eye protection, 29 CFR 1926.95 covers many other hazardous situations including flying particles, chemical exposure, and other light radiation sources beyond welding.
Option D: Only when working with chemicals
This is overly narrow. The regulation covers chemical hazards but also includes flying particles, molten metal, caustic liquids, chemical gases, and potentially injurious light radiation from various sources, not just chemicals.
Memory Technique
Remember 'FACE the HAZARD' - whenever there's a Face And eye hAZard from Any Reason on a construction site, protection is required under 29 CFR 1926.95.
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
Your crew discovers suspected asbestos-containing materials during a renovation project. What is the first action you should take?
A scaffold platform is 12 feet long and 5 feet wide. If the maximum load capacity is 25 pounds per square foot, what is the total weight capacity of this platform?
Which CSI MasterFormat Division would contain specifications for fire-stopping and firesafing materials?
In tilt-up concrete construction, what is the primary advantage of this method over conventional cast-in-place construction?
Which OSHA standard specifically addresses construction industry safety and health regulations?
A structural drawing shows a beam labeled 'W12x26'. What does the '26' represent?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass